STACKS adds stacks to handle hardware interrupts.
STACKS is a CONFIG.SYS / FDCONFIG.SYS command.
nn The number of stacks in the range 8-64 and 0.
mmm The size of each stack, in bytes, in the range 32-512.
This command is not needed on standard installations.
STACKS changes number and size of hardware interrupt stacks available.
nn is number of different stacks and mmm is size in bytes of each one.
In some cases you can use "stacks=0,0" to use only standard stacks
instead of letting DOS allocate extra stacks for hardware interrupts.
STACKS is a command internal to kernel.sys and needs no other file
in order to work.
IN CONFIG.SYS / FDCONFIG.SYS:
Please read this command's lsm file also.
You will find the updated version (internet) here and
the version described in this manual page here.
The lsm file contains information about the name of the programmer,
the download site, and some other command related information.
Copyright © 1998 Jim Hall, updated 2008 by W. Spiegl.
This file is derived from the FreeDOS Spec Command HOWTO.
See the file H2Cpying for copying conditions.